The Portable Brinell Hardness Tester is a lightweight, full load (3000kg) instrument capable of accurately testing a large variety of metal specimens. The tester's portability allows it to be used in any plane, conventionally for full load (3000Kg), in-situ Brinell testing of large components.
Features
- Permanence: Impression can be checked and rechecked anytime
- Accuracy: Calibrated to 0.5 of 1% of load; Can be used for higher loads up to 3000kg; Breaks through surface heat treatment to get to the core of the material
- Versatility Can be used in virtually any position; right-side up, upside down or sideways
- Durability Some portable Brinell testers have been working over 60 years
Portable Brinell Hardness Tester HB120
|
• Standard test head
Calibrated accurate to 1/2 of 1% load.
Releases at 3000kg automatically.
Capable of incremental loads.
|
 |
• Chain adapter
Used for large cylinders it fits onto a standard test head and wraps around specimens that aretoo big for regular tester. High strength chrome/molybdenum steel arms hold the chain to the test head and allow it to stay rigid while the chain takes the full thrust of the load. Supplied with 4" chain
|
 |
|
• Standard test head with long ram
Same features as standard test head plus a long ram that puts impression head at end of 2" extension for easy access into recessed areas or over raised edges.
|
 |
• Base
14" base with 14" test height opening and 4" throat is standard. Optional 6" throat with either 14" or 20" test height opening available, 20" base also available with 4" throat and 20" test height opening
|
 |
|
• Low pressure test head
Applied load and indicator dial are coordinated for softer metals.
Can be calibrated to release at loads of 62-1/2kg, 125kg, 250kg, 500kg, or 1000kg.
|
 |
• 2.5mm and 5mm ball adapter
Used on softer materials or where a smaller impression is desired
|
 |
|
• Low pressure test head with long ram
Same features as low pressure test head plus a long ram that puts impression head at end of 2" extension for easy access into recessed areas or over raised edges.
|
 |
• Stage micrometer
Used to check calibration of Brinell Microscope by placing the microscope on the stage micrometer and aligning the grid on the stage micrometer with the grid on the microscope.
If the grids do not match perfectly, the microscope is out of calibration and should be re-calibrated.
Meets ASTM50, and is traceable to NIST standards
|
 |
|
• Adapter to hold test head upright without base
For testing large flats it enables test heads to be used under large drill presses, boring mills, arbor presses and beams that are capable of withstanding 3000kg load
|
 |
• Brinell microscope
Constructed from stainless steel, the rugged and optically reliable Brinell microscope is the most versatile on the market today.
Featuring a 20x pre-focused lens, the microscope has a narrow nosepiece which easily fits into tight recesses, resulting in less grinding on castings, billets and dies. For added stability when performing flat work, a slip-on base adapter is included. A side opening in the microscope allows plenty of natural light for viewing, and a cordless movable pen light can be used in dim conditions. Calibrated on equipment traceable to NIST standards, the Brinell microscope meets ASTM 5-10 specifications.
It is ready to use and comes equipped with a handy storage case
|
 |
Request A Quote
To receive further information on HB120-Portable, please complete the following form. We will reply as soon as possible
Sorry, this product does not have video.
