SPG SEAL PEEL COMPOUND

Seal Peel Compound

Anti-corrosive packing materials heated dip type strippable plastic

The SEAL PEEL is the finest solution to protect your work-piece against faulty transport, rust, corrosion, mold, magnetic impedance, oxidation, water penetration, sulfur mist, sea breeze and brine, and has a high electrical insulation. The silicon films are elastic and will not be damaged even if it is roughly handled. It is a perfect epoch-making and anti-corrosive packing material which perfectly fulfills two major purpose of preservation and packing for the product in place of conventional three-step packing using oils, paper and cardboard box (or wooden box).

The finish coating of Seal Peal can be manually handled as it has the typical of being non toxic and non fuming. By simply dipping your work-piece on your thermostat on 180℃ and drawing it up slowly for 60 seconds, you can have the jellyish coating with life span of more than 10 years of storage. The Seal Peal is  not only practical but also highly resistant against other chemical exposure of lubricants, oil, cooling liquids, acid, organic solvent, alkali and alcohol derivatives. 

SPG Seal Peel Compound Features:

1. Use by heating .
2. Excellent chemical resistance.
3. Excellent water proofness and salt water resistance.
4. Excellent elasticity.
5. Thick film forming by one dipping process.
6. Excellent corrosion preventive property.
7. Intoxic. 

 SPG Seal Peel Compound Effects:

1. Reduced packing cost.
2. Easy removal and immediate use.
3. Perfect anti－corrosion because of oozing oil.
4. Reduction in weight.
5. Prevention of defective packing（ for export ）
6. Capability of repeated use.
7. No other packing materials required
8. Easy inspection

9. Easy operation.
10. Quick operation

11. Reduced packed size.
12. Dimensions number , etc. visible from outside.
13. Protection from damage and wear during transportation.
14. No strain from heating.
15. Convenience for storage of goods

SPG Seal Peel Compound Applications:

1. Corrosion prevention and protection from damage.

Corrosion prevention of components tools, jigs of vehicles, air－crafts looms automobiles as well as other general machine components. Protection of various metal components , polished metal surfaces, plated surface , gears, cutters, hobs, nozzles plunger drills , dies, reamer taps , instruments, gauges , slide calipers, micro meter bits and diamonds tools.

2. Insulation
Insulation and protection of electronic components.

3. Plating
It is used in finishing of plating because of its insulating.

4. Moisture－proof
Machinery and equipment of various kings which are likely to be damaged by sea water and sea breeze.

5. Storage of components .
Perfect storage of various goods and components. Seal Peel is most suitable for export packing.

How To Use

• Melting

First, put Seal Peel cut into pieces in a melting tank, in which indirect heating can be done . As Seal Peel is very slow in heat conduction, melt it while gradually raising the temperature. Gradually raise the melting temperature, from 100℃ for 30 minutes, to 130℃ for 30 minutes and then to 180℃.

If the temperature is rapidly raised, the Seal Peel is deteriorated and aged, and loses the effect by half. Carefully keep the temperature in the tank under 200℃. It is ideal to equip the tank with a thermostat so as to keep within the specified temperature limit. The thermostat always keeps the fixed temperature to enable continuous film forming with a fixed thickness.

• How To Dip

Clean the surface of the packed article （remove oil and dirt ）,dip it into the solution in the tank and immediately take it out. The article is packed with 0.8 to 2 mm thick compound film within the specified time （1 to 2 minutes）and the hardened film is adheres in 30 to 40 seconds. （An article with holes or clearance is preferably wrapped with aluminum foil before dipping.）

• Cautions

1. The surface of the packed article shall be cleaned.
2. Dipping time depends more or less on the size.
3. If abnormal white smoke is emitted from Seal Peel liquid, it means that the temperature exceeds the specified limit. Immediately adjust the heating article.
4. Do not dip any heated article.
5. Do not rapidly melt it is at a high temperature.
6. Dehumidify any porous article or any damp article before dipping.
7. When bubbles generate from the dipped article, change the dipping angle.
8. When bubbles are seen in the melted liquid, heated it for a while until bubbles disappear.

To serve your interest on various Seal Peel solutions, kindly contact our Sales Department