CX6-S saw blades are carbide tipped and PVD coated for cutting stainless steel solids with a diameter ≤ 35 mm. High production rates and optimal surface finish can be achieved with our dedicated geometry. Advantages: New saw body design Best saw blade when cutting ferritic, martensitic and duplex stainless steel at smaller diameter ranges Specifically developed for stainless steel solids with a diameter ≤ 35 mm Dedicated tooth geometry Applications: Austenitic, ferritic, martensitic and duplex stainless steel bars with a diameter ≤ 35 mm Suggested cutting speed: 80 – 140 m/min. Feed: 0,03 – 0,05 mm/tooth. Soco, Tsune,…
CX6-S saw blades are carbide tipped and PVD coated for cutting stainless steel solids with a diameter ≤ 35 mm.
High production rates and optimal surface finish can be achieved with our dedicated geometry.
Advantages:
New saw body design
Best saw blade when cutting ferritic, martensitic and duplex stainless steel at smaller diameter ranges
Specifically developed for stainless steel solids with a diameter ≤ 35 mm
Dedicated tooth geometry
Austenitic, ferritic, martensitic and duplex stainless steel bars with a diameter ≤ 35 mm
Suggested cutting speed: 80 – 140 m/min.
Feed: 0,03 – 0,05 mm/tooth.
Soco, Tsune, Amada, Mega, Kasto, Kentai, Behringer, Exactcut, Everising
Note: Respect 10% fill ratio, use wire brush, check quality and supply of oil. Mist preferred. Check temperature of cut surface (should be cold).
To serve your interest on Kinkelder TCT CX 6-S, kindly contact our Sales Department
To receive further information on Kinkelder TCT CX 6-S, please complete the following form. We will reply as soon as possible