TubeMaster saw blades have especially been designed for orbital flying cut-off applications on tube mills. Key features of this saw blade are fractureresistant carbide tips, protected with a high-tech TiAlN-based PVD coating. Combined with a light cutting geometry for smooth chip evacuation, a milled like surface finish is achieved. This geometry also reduces vibration when cutting thin walled tubes (<4mm), thereby achieving excellent blade life. The new generation of TubeMaster products has a new body design, new carbide grade, new tip geometry and a special coating. This results in a higher blade life and more regular blade performance. Kinkelder Circular Saw TCT…
TubeMaster saw blades have especially been designed for orbital flying cut-off applications on tube mills.
Key features of this saw blade are fractureresistant carbide tips, protected with a high-tech TiAlN-based PVD coating. Combined with a light cutting geometry for smooth chip evacuation, a milled like surface finish is achieved. This geometry also reduces vibration when cutting thin walled tubes (<4mm), thereby achieving excellent blade life.
The new generation of TubeMaster products has a new body design, new carbide grade, new tip geometry and a special coating. This results in a higher blade life and more regular blade performance.
Kinkelder Circular Saw TCT TubeMaster Applications :
Orbital, flying cut-off applications
Kinkelder Circular Saw TCT TubeMaster User Benefits:
Parameters:
Suggested cutting speed: 350 – 400 m/min. Feed 1/2: 0,04 / 0,12 mm/tooth.
Note: To accommodate higher requirements of line speed or reduce vibration level, much higher cutting speeds (up to 600 m/min) can be applied. Tooth load can be raised , while respecting max fill ratio of 10% during entry. Respect max cut depth of 3mm.
To serve your interest on Kinkelder TCT TubeMaster, kindly contact our Sales Department
To receive further information on Kinkelder TCT TubeMaster, please complete the following form. We will reply as soon as possible