SPG SEAL PEEL COMPOUND

SPG SEAL PEEL COMPOUND thumbnail
SPG SEAL PEEL COMPOUND thumbnail

Seal Peel Compound ED-7 conform with the U.S. Packing Standard MIL-4-149A. The SEAL PEEL is the finest solution to protect your work-piece against faulty transport, rust, corrosion, mold, magnetic impedance, oxidation, water penetration, sulfur mist, sea breeze and brine, and has a high electrical insulation. The silicon films are elastic and will not be damaged even if it is roughly handled. It is a perfect epoch-making and anti-corrosive packing material which perfectly fulfills two major purpose of preservation and packing for the product in place of conventional three-step packing using oils, paper and cardboard box (or wooden box). The finish…

Read more

Contact us for more information :

+62 21 62 63 851 / 52
marketing@yakinmaju.com

Seal Peel Compound ED-7 conform with the U.S. Packing Standard MIL-4-149A.

The SEAL PEEL is the finest solution to protect your work-piece against faulty transport, rust, corrosion, mold, magnetic impedance, oxidation, water penetration, sulfur mist, sea breeze and brine, and has a high electrical insulation. The silicon films are elastic and will not be damaged even if it is roughly handled. It is a perfect epoch-making and anti-corrosive packing material which perfectly fulfills two major purpose of preservation and packing for the product in place of conventional three-step packing using oils, paper and cardboard box (or wooden box).

The finish coating of Seal Peal can be manually handled as it has the typical of being non toxic and non fuming. By simply dipping your work-piece on your thermostat on 180℃ and drawing it up slowly for 60 seconds, you can have the jellyish coating with life span of more than 10 years of storage. The Seal Peal is  not only practical but also highly resistant against other chemical exposure of lubricants, oil, cooling liquids, acid, organic solvent, alkali and alcohol derivatives. 

 

SPG Seal Peel Compound ED-7 Features:

  • Non-toxic, practical for manual handlings and packing.
  • Corrosion prevention & scratch free protection with selectable type for perfect transparent and semi-transparent suitable for jigs, mechatronics part, injection mould, titanium cutting tools, diamond mining-drill bit and many other valuable work-piece made of metals or other hard mineral.
  • Operating temperature is 160℃ to 190℃ with heat conductivity value of 0.00017
  • As practical as peeling a banana skin, compared with conventional packing, the sealpeel can be peeled priorly by making a small incision for opening.
  • Heat-resistance melting point: 120℃ to 130℃
  • Heating limit is 200℃ with ignition point of >280℃
  • Can be reused or recycled several times for your cost saving application as long as you can cleanse it first from debris and metallic or paint dust.

 

To serve your interest on various SPG Seal Peel solutions, kindly contact our Sales Department

SPG SEAL PEEL COMPOUND

 

To meet various applications , it is available in five kinds:

 

To serve your interest on various SPG Seal Peel solutions, kindly contact our Sales Department

Request A Quote

To receive further information on SPG SEAL PEEL COMPOUND, please complete the following form. We will reply as soon as possible


Sorry, this product does not have video.