Behringer Table Bandsaw LPS-T

Behringer Table Bandsaw LPS-T

The compact vertical band saw - ideal for toolmaking and test cuts

With its moveable support table, the easy-to-use LPS-T vertical bandsawing machine is the all-rounder when it comes to sawing small, compact parts and short sections – i.e. those typically needed in toolmaking. Sample cuts and notching work on difficult-to-machine material are also part of its repertoire. What is more: due to the compact dimensions the LPS-T can also be set up in areas with limited space.

Features of the LPS-T:

• Unsurpassed precision and cutting performance

The high cutting accuracy, quiet running and long blade life are all down to the special torsion resistant design of the saw frame. In comparison to plate and block bandsaw machines from other manufacturers, the force for the saw feed is applied directly beneath the cutting point, which results in feed movements that are considerably more accurate.

• NC measuring unit

The LPS-T can be equipped with an optional NC-controlled measuring unit. The cutting depth is digitally pre-programmed in the control system. When placing down the material to be cut, it can be easily aligned with the measuring device and then securely clamped. This considerably speeds up the setup process.

• Servo Feed System

The BEHRINGER servo feeding system ensures constant chip removal and makes better use of the capabilities of modern bandsaw blades. The rapid response of the servo feeding system to the sensors for the cutting pressure regulation systematically prevents overloading and premature wear of the bandsaw blades.

• Quick bandsaw blade change

Quick and easy – tool-free bandsaw blade changes mean shortest set-up times. Just a few simple steps are all that is needed to change the bandsaw blade.

• Cast iron band guiding parts

are made by BEHRINGER and provide vibration damping directly at the cutting edge, thus increasing tool life.

• Chip conveyor standard

A generously sized chip conveyor with integrated coolant tank is located under the saw unit, directly in the chip flow direction. Any chips and coolant are collected here and separated. The conveyor can be moved out of the machine frame for cleaning and maintenance.

• Compact

Due to its compact dimensions, it can also be set up in constricted spaces.

• Movable material support table

For easy loading and unloading by crane, the material table can be moved out from under the saw unit.

• Powered duplex chip brushes

actively clean the blade and prevent chips being drawn into the cutting channel. The brushes are adjusted automatically towards the saw blade, ensuring uniform cleaning action. The benefits: Increased tool service life and lower brush wear.