TECLOCK DIAL TEST INDICATOR LT-358

TECLOCK DIAL TEST INDICATOR LT-358

TEST INDICATOR

Dial Test Indicators are designed to the positioned for easy and accurate readability and are applicable for various usages such as measuring dimension, parallelism and centering of work piece and measuring revolution axis of machinery equipment and turnout of work pieces processed by lathe etc., and making table face of machinery equipment parallel. This has strong point if compared with standard dial indicator and has sensitivity for microscopic dimension displacement measurement. As its stylus is leg type with ball edge, narrow space can be measured, where its edge (standard φ2mm ultra hand ball ) can enter. φ0.6mm, φ0.8mm and φ1.0mm are available.

AUTO-CLUTCH TEST INDICATOR

• As miniature bearing (pivot ball bearing) is used for stylus revolution bearing. It is not affected by shaft looseness and indication is stable.
 • Measuring direction is automatically changed for proper and opposite by auto-clutch mechanism without changing lever. It is always read accurately in any case, as stylus rotates in clockwise direction.
 • Stylus can be set at any desired position of angle of 220 °circle

• Stem with dovetail groove (Option) can be mounted to 2 points of front and back part.
 • A carbide ball stylus is provided for less abrasion and stylus is made of stainless steel
 • Stylus and pointer are anti-magnetic and not affected by magnetism

Stems with dovetail slot for Auto-Clutch Test Indicator (Option)

Levelling, parallelism and center run out of work place are measured by fixing lever test with holder or chuck and moving work piece. Above photo shows that leveling is measured by installing test indicator to electric discharge machine machining center.

Auto-Clutch Test Indicator (Low measuring force)

To serve your interest on various Teclock solutions, kindly contact our Sales Department