Cutting low to medium tensile solid carbon steel (< 750 N/mm2) CX7 is a Cermet tipped, PVD coated saw blade dedicated to cutting solid carbon steel (carbon content < 0.60%) with a low to medium tensile strength up to 750 N/mm2. The best blade performance is being achieved when cutting lower tensile strength materials. On many applications, a blade life of 50 m2 and more can be achieved. Advantages: High blade life on solid cutting Smooth surface Low cost per cut job Applications: Solid carbon steel with a tensile strength up to 750 N/mm2 Suggested cutting speed: 100 – 280 m/min…
Cutting low to medium tensile solid carbon steel (< 750 N/mm2)
CX7 is a Cermet tipped, PVD coated saw blade dedicated to cutting solid carbon steel (carbon content < 0.60%) with a low to medium tensile strength up to 750 N/mm2.
The best blade performance is being achieved when cutting lower tensile strength materials. On many applications, a blade life of 50 m2 and more can be achieved.
High blade life on solid cutting
Smooth surface
Low cost per cut job
Solid carbon steel with a tensile strength up to 750 N/mm2
Suggested cutting speed: 100 – 280 m/min
Feed: 0,06 – 0,10 mm/tooth.
Machines: Soco, Kasto, Nishijima, Tsune, Amada, Behringer, RSA, Rattunde, Sinico, Mega, Exactcut, Everising
Note: Respect 10% fill ratio, use wire brush, check quality and supply of oil. Mist preferred.
To serve your interest on Kinkelder TCT CX 7, kindly contact our Sales Department
To receive further information on Kinkelder TCT CX 7, please complete the following form. We will reply as soon as possible